Update 6.00.06 is out for Electronic Toolbox and RF Toolbox

A new app update is available for both apps

This update contains the following changes:

  • For non-retina devices, there is now a new “small” Icon setting which is different to the “standard” which gives you back the Icon size as before if you prefer this size.
  • A more consistent and correct usage of the “mils” unit
  • Some corrections and changes for 3-Band resistors
  • Some corrections in the OpAmp tool, especially for the inverting and differential OpAmp calculations
  • Some corrections in the Attenuator calculator
  • Now, for iOS 4 devices, the “special keyboard” will be disabled automatically as this is not possible with iOS 4
  • Faster data update download
  • A new tool for SWG (Standard Wire Gauge)
  • And finally, EIA-96 coding support in the SMD resistor tool

Those changes apply to Electronic Toolbox as well as to RF Toolbox.

I am currently already working on some more change requests you sent me and also on some new tools that are hopefully about to come soon.

Thanks again for all your mails and support.

Kind regards,

Marcus

P.S.

I am still receiving questions from people wondering about the changes in Version 6. You can find more information here : Version 6 changes

Information about Electronic Toolbox can be found here: Electronic Toolbox Home

And Information about RF Toolbox can be found here: RF Toolbox Home


New Data update for Electronic Toolbox and RF Toolbox

A new data update V 1.24 is available for both apps

A new Data update 1.24 is available for Electronic Toolbox and RF-Toolbox which contains the following changes:

  • Corrected resistance per feet dimension in the AWG tool
  • Corrected formula for the RLC parallel and series tool
  • New sockets: Tascam, Yamaha/Apogee
  • Corrected circuit diagram for the differential OpAmp
  • and some other minor changes

Electronic Toolbox also receives new Translations for Portuguese and Italian. Many thanks goes to Rui from Portugal and OM massimo from Italy for their fantastic translations. Thank you so much.

During the last days, I already sent a new app update 6.00.06 to apple which contains some more changes and additions that required an app update.

Thanks again for your support, your help and submitting your findings.

Kind regards,

Marcus


Electronic Toolbox 6 available

Electronic Toolbox news

First of all Happy New Year to everybody!

Good news though! Finally Electronic Toolbox 6 is available on the app store and can be updated for free.

The new version contains several improvements and extensions. Here is an excerpt of most of the changes:

  • 4″ Retina and iPad Mini support.
  • iOS 6 support but still compatible starting from iOS 4.3 and runs on all devices from iPod-Touch, iPhone and iPad devices that run at least iOS 4.3.
  • Global Search across all tools and databases.
  • New special keyboards for faster hexadecimal and numeric entries.
  • New option to add the calculation result screen to a project.
  • New option to print the calculation results.
  • New setting for switching between metric or imperial units.
  • Especially for the US, possibility to switch off the use of ‘U’ for Voltage in the settings.
  • Support for E-Series standard values across the whole app for resistors, capacitors and inductors.
  • Rearranged and simplified settings screen.
  • Indication whether a PDF has or has nor already been downloaded.
  • Better optimization of fonts, formulas and images especially for the iPad.
  • The Measurements tool has been completely rewritten.
  • New Tool: SMD Resistore Code.
  • New Tool: Inductor Code.
  • New Tool: Formulas for quick search for individual formulas.
  • New Tool: Bridge Rectifier.
  • New Tool: Toroid Winding.
  • New Tool: Transformer.
  • New Table: Physical Constants.
  • The Voltage regulator Tool now also supports the LM350.
  • The LED-Tool now also calculates the resistor power.
  • The Filter Tool now also supports Band-Stop filters.
  • Improvements of the tools NE555, Reactance, Filter and OpAmp.
  • Optimized and nicer Icon display.
  • Improved data update mechanism.
  • Some error corrections.

Please note that this version now requires at least iOS 4.3. Please do not install if you are using an older iOS version.

Detail information and information on how to use these new features can be found here on creating-your-app.com/etb6.

Finally a big big thank you for your suggestions and support. You helped me and the other users to continuously keep up my work on my app.

Please stay tuned as I am already working on the next version.

If you like this update, please continue to support me be writing or updating your app store review a review is just visible for the current version.

If you find an error or something that is missing or can be improved, please let me know via E-Mail as I can’t respond to app store reviews.

Thanks again and kind regards,

Marcus